Ampush logoAMPUSHWORKS
Home / Training / Syllabus

Programme 04 · One month · 102 hours

GSM, Wi-Fi and Wireless Communication

Many field devices must work where there is no wired network. This course covers the main wireless technologies used in remote monitoring and control, with particular focus on GSM, which is widely used in rural and field installations, along with Wi-Fi, LoRa, Bluetooth and RF modules.

Duration1 month per programme
Course fee₹3,000 per candidate
Training hours102 hours: theory 32, practical 64, exams 6
Batch sizeMinimum 10 candidates per batch

Course objectives

  • Explain how GSM, Wi-Fi, LoRa, Bluetooth and RF work
  • Control GSM modules using AT commands
  • Build SMS and call-based control systems
  • Set up Wi-Fi and LoRa links
  • Select the right wireless technology for an application

Prerequisites: Basic electronics and microcontroller programming (Arduino or ESP).

Hours distribution

ComponentHours
Theory classes (8 units × 4 h)32
Practical sessions (14 labs × 4 h)56
Mini project8
Theory examination2
Practical examination4
Total102

32 hours

Theory syllabus

UnitTopicsHours
Unit 1Wireless communication basics
  • Radio waves, frequency and range
  • Licensed and unlicensed bands
  • Comparing wireless technologies
4
Unit 2GSM and GPRS
  • How mobile networks work
  • GSM modules and SIM cards
  • Power supply needs of GSM modules
4
Unit 3AT commands
  • Command structure and responses
  • Network registration and signal strength
  • Sending and reading SMS
4
Unit 4SMS and call-based control
  • Remote switching by SMS
  • Missed-call control
  • Status reports and alerts by SMS
4
Unit 5Wi-Fi networking
  • Wi-Fi standards and modes
  • Connecting devices to a router
  • Range and reliability
4
Unit 6LoRa communication
  • LoRa principles and range
  • Point-to-point links
  • Use in agriculture and utilities
4
Unit 7Bluetooth and RF modules
  • Bluetooth basics and pairing
  • RF modules such as nRF24L01+
  • Choosing modules for short-range links
4
Unit 8Antennas and system design
  • Antenna types and placement
  • Signal testing in the field
  • Designing a reliable remote-control system
4

64 hours

Practical sessions

LabPractical assignmentHours
1Power up a GSM module and check network4
2Basic AT commands and signal strength4
3Send an SMS from a microcontroller4
4Read and parse incoming SMS4
5SMS-based relay control4
6Missed-call based control4
7SMS status report on request4
8Connect an ESP32 to Wi-Fi and test range4
9LoRa point-to-point link4
10LoRa sensor data transmission4
11Bluetooth control from a mobile phone4
12nRF24L01+ wireless link4
13Antenna placement and signal comparison4
14Troubleshooting a wireless link4
MPMini project: GSM-based remote motor control: SMS and missed-call control with status and fault alerts by SMS.8
Total practical hours64

Hardware, tools & software

  • GSM modules (for example SIM800L, A7670C) with SIM cards
  • ESP32, LoRa (Ra-02 / E32), Bluetooth and nRF24L01+ modules
  • Antennas and power supplies
  • Relay modules and a test motor or lamp

Learning outcomes

  • Use AT commands to control GSM modules
  • Build SMS and call-based control systems
  • Set up Wi-Fi, LoRa, Bluetooth and RF links
  • Choose suitable wireless technology for a field application

Assessment & certificate

ExaminationDuration
Theory: concepts, components and principles from the 8 units2 h
Practical: build, wire, program, test, fault-find; mini project presentation4 h

A training completion certificate is issued subject to successful completion of the programme and assessment requirements.

📄 Download this syllabus: English PDF · हिंदी PDF

Register for this programme

Course fee ₹3,000 is paid only after your batch is confirmed. Prefer WhatsApp? Register on WhatsApp.

CallWhatsAppQuote