Programme 10 · One month · 102 hours
Industrial IoT and Sensor Technologies
Industrial IoT brings monitoring and data to factories, utilities and infrastructure. This course covers industrial sensors, standard signals, industrial communication and the integration of edge devices with cloud monitoring and alarms.
Duration1 month per programme
Course fee₹3,000 per candidate
Training hours102 hours: theory 32, practical 64, exams 6
Batch sizeMinimum 10 candidates per batch
Course objectives
- Identify industrial sensors and their uses
- Work with standard signals such as 4–20 mA
- Use RS-485 and Modbus communication
- Integrate edge devices with cloud monitoring
- Design alarms and dashboards for industrial applications
Prerequisites: Basic electronics and basic IoT or microcontroller knowledge.
Hours distribution
| Component | Hours |
|---|---|
| Theory classes (8 units × 4 h) | 32 |
| Practical sessions (14 labs × 4 h) | 56 |
| Mini project | 8 |
| Theory examination | 2 |
| Practical examination | 4 |
| Total | 102 |
32 hours
Theory syllabus
| Unit | Topics | Hours |
|---|---|---|
| Unit 1 | Introduction to Industrial IoT
| 4 |
| Unit 2 | Industrial sensors
| 4 |
| Unit 3 | Signals and conditioning
| 4 |
| Unit 4 | Industrial communication
| 4 |
| Unit 5 | Edge devices and controllers
| 4 |
| Unit 6 | Cloud monitoring
| 4 |
| Unit 7 | Alarms and events
| 4 |
| Unit 8 | System integration and reliability
| 4 |
64 hours
Practical sessions
| Lab | Practical assignment | Hours |
|---|---|---|
| 1 | Identify industrial sensors and wiring | 4 |
| 2 | Read a 4–20 mA sensor | 4 |
| 3 | Signal scaling and calibration | 4 |
| 4 | Measure current and energy | 4 |
| 5 | RS-485 wiring and termination | 4 |
| 6 | Read a Modbus RTU device | 4 |
| 7 | Write and read Modbus registers | 4 |
| 8 | Configure an edge gateway | 4 |
| 9 | Send industrial data to the cloud | 4 |
| 10 | Build an operations dashboard | 4 |
| 11 | Configure alarms and notifications | 4 |
| 12 | Event logging and reports | 4 |
| 13 | Enclosure and power design exercise | 4 |
| 14 | Fault-finding in an IIoT set-up | 4 |
| MP | Mini project: Industrial monitoring system: multiple sensors over 4–20 mA and Modbus, edge gateway, cloud dashboard and alarms. | 8 |
| Total practical hours | 64 |
Hardware, tools & software
- Industrial pressure, temperature and current sensors
- 4–20 mA signal sources and converters
- RS-485/Modbus modules and energy meters
- Edge gateways, ESP32 boards and a cloud IoT platform
Learning outcomes
- Connect industrial sensors and read standard signals
- Communicate with devices using Modbus
- Integrate edge devices with cloud dashboards
- Design alarms for industrial monitoring
Assessment & certificate
| Examination | Duration |
|---|---|
| Theory: concepts, components and principles from the 8 units | 2 h |
| Practical: build, wire, program, test, fault-find; mini project presentation | 4 h |
A training completion certificate is issued subject to successful completion of the programme and assessment requirements.
📄 Download this syllabus: English PDF · हिंदी PDF