Programme 01 · One month · 102 hours
Internet of Things (IoT)
This course introduces the complete chain of an Internet of Things system: sensing a physical quantity, processing it on a microcontroller, sending it over a network and viewing or acting on it from a cloud dashboard. The course is built around practical IoT applications such as irrigation and water-supply monitoring.
Duration1 month per programme
Course fee₹3,000 per candidate
Training hours102 hours: theory 32, practical 64, exams 6
Batch sizeMinimum 10 candidates per batch
Course objectives
- Explain the architecture and building blocks of an IoT system
- Interface common sensors and actuators with a microcontroller
- Connect devices to the internet and send data to a cloud platform
- Build dashboards, alerts and remote control for an IoT application
- Apply basic security practices to IoT devices
Prerequisites: Basic knowledge of electricity and electronics. No prior programming experience is required, but basic computer skills are expected.
Hours distribution
| Component | Hours |
|---|---|
| Theory classes (8 units × 4 h) | 32 |
| Practical sessions (14 labs × 4 h) | 56 |
| Mini project | 8 |
| Theory examination | 2 |
| Practical examination | 4 |
| Total | 102 |
32 hours
Theory syllabus
| Unit | Topics | Hours |
|---|---|---|
| Unit 1 | Introduction to IoT
| 4 |
| Unit 2 | Electronics fundamentals for IoT
| 4 |
| Unit 3 | Microcontrollers for IoT
| 4 |
| Unit 4 | Sensors and actuators
| 4 |
| Unit 5 | Connectivity
| 4 |
| Unit 6 | IoT protocols and data
| 4 |
| Unit 7 | Cloud platforms and dashboards
| 4 |
| Unit 8 | IoT security and applications
| 4 |
64 hours
Practical sessions
| Lab | Practical assignment | Hours |
|---|---|---|
| 1 | Blink an LED and read a push button | 4 |
| 2 | Read temperature and humidity and display on serial monitor | 4 |
| 3 | Soil-moisture sensor with threshold indication | 4 |
| 4 | Control a relay to switch a load | 4 |
| 5 | Connect an ESP32 to Wi-Fi | 4 |
| 6 | Send sensor data to a web server using HTTP | 4 |
| 7 | Publish and subscribe with MQTT | 4 |
| 8 | Create a cloud dashboard with live readings | 4 |
| 9 | Remote on/off control of a load from a dashboard | 4 |
| 10 | Set up threshold alerts and notifications | 4 |
| 11 | Water-level monitoring with a level sensor | 4 |
| 12 | Log sensor data and view history charts | 4 |
| 13 | Basic device security: credentials and secure connection | 4 |
| 14 | Troubleshooting connectivity and sensor faults | 4 |
| MP | Mini project: IoT-based irrigation controller: soil-moisture sensing, automatic pump control and a cloud dashboard with remote override. | 8 |
| Total practical hours | 64 |
Hardware, tools & software
- Arduino and ESP32 boards
- Temperature, humidity, soil-moisture and level sensors
- Relay modules, LEDs and buzzers
- Breadboards, jumper wires and power supplies
- Laptop with programming software and a cloud IoT platform
Learning outcomes
- Build a working IoT device from sensor to cloud dashboard
- Use HTTP and MQTT to send and receive data
- Configure alerts and remote control
- Plan an IoT solution for a simple real-world problem
Assessment & certificate
| Examination | Duration |
|---|---|
| Theory: concepts, components and principles from the 8 units | 2 h |
| Practical: build, wire, program, test, fault-find; mini project presentation | 4 h |
A training completion certificate is issued subject to successful completion of the programme and assessment requirements.
📄 Download this syllabus: English PDF · हिंदी PDF