Duration1 month per programme
Course fee₹3,000 per candidate
Training hours102 hours: theory 32, practical 64, exams 6
Batch sizeMinimum 10 candidates per batch
Course objectives
- Describe types of robots and their applications
- Select and drive DC, servo and stepper motors
- Use sensors for navigation and obstacle detection
- Program robot behaviour and control logic
- Build and test a working robot
Prerequisites: Basic electronics and basic microcontroller programming.
Hours distribution
| Component | Hours |
|---|---|
| Theory classes (8 units × 4 h) | 32 |
| Practical sessions (14 labs × 4 h) | 56 |
| Mini project | 8 |
| Theory examination | 2 |
| Practical examination | 4 |
| Total | 102 |
32 hours
Theory syllabus
| Unit | Topics | Hours |
|---|---|---|
| Unit 1 | Introduction to robotics
| 4 |
| Unit 2 | Mechanical basics
| 4 |
| Unit 3 | Motors
| 4 |
| Unit 4 | Motor drivers
| 4 |
| Unit 5 | Sensors for robots
| 4 |
| Unit 6 | Robot programming
| 4 |
| Unit 7 | Control and automation basics
| 4 |
| Unit 8 | Robotic arms and applications
| 4 |
64 hours
Practical sessions
| Lab | Practical assignment | Hours |
|---|---|---|
| 1 | Assemble a robot chassis | 4 |
| 2 | Run DC motors with a motor driver | 4 |
| 3 | Speed control with PWM | 4 |
| 4 | Servo motor positioning | 4 |
| 5 | Stepper motor control | 4 |
| 6 | IR line sensor reading | 4 |
| 7 | Ultrasonic obstacle detection | 4 |
| 8 | Line-following robot | 4 |
| 9 | Obstacle-avoiding robot | 4 |
| 10 | Bluetooth-controlled robot | 4 |
| 11 | Encoder-based distance measurement | 4 |
| 12 | Servo-driven robotic arm control | 4 |
| 13 | Simple pick-and-place sequence | 4 |
| 14 | Fault-finding in a robot | 4 |
| MP | Mini project: Autonomous robot: line-following with obstacle avoidance and remote override. | 8 |
| Total practical hours | 64 |
Hardware, tools & software
- Robot chassis kits, wheels and gear motors
- Servo and stepper motors with drivers
- IR, ultrasonic and encoder sensors
- Microcontroller boards and batteries
Learning outcomes
- Assemble and wire a mobile robot
- Drive and control different motor types
- Program robot behaviour using sensors
- Explain basic control and automation concepts
Assessment & certificate
| Examination | Duration |
|---|---|
| Theory: concepts, components and principles from the 8 units | 2 h |
| Practical: build, wire, program, test, fault-find; mini project presentation | 4 h |
A training completion certificate is issued subject to successful completion of the programme and assessment requirements.
📄 Download this syllabus: English PDF · हिंदी PDF